Faucet Placement On 60/40 Sink: 2 Ideal Positions

Double kitchen sinks come with numerous advantages, and from all styles, the 60/40 sinks are the most popular. This configuration refers to a double sink with two bowls of different sizes. Most people use the larger bowl to soak pots and pans while washing veggies or rinsing dishes in the smaller one. That said, figuring out where to place the faucet can be a bit of a challenge.

As a rule of thumb, the faucet placement on a 60/40 sink should be centered with the sink divider. However, you can also place the faucet centered with the sink if you’re a symmetry fanatic and don’t want it to look awkward when glancing at your kitchen from afar.

What Is The Purpose Of A 60/40 Sink?

The purpose of a 60/40 sink – and of any other double sink, as a matter of fact – is to give you enough workspace to soak pots and pans whilst also having a clean sink for rinsing or washing vegetables.

This particular combination is so popular because the smaller side also provides you with plenty of support for scrubbing. You won’t have to worry about the pan sliding inside the sink constantly, as the smaller sink’s walls will hold it in place.

When it comes to configurations, both bowls in a 60/40 can have the same length and depth, or the smallest bowl is slightly shorter and shallower. This gives homeowners the possibility to install a tailored kitchen.

Larger Sink On Left or Right Side: 5 Conditions To Consider

Deciding whether the large side of a 60/40 should be on the left or right requires thoughtful consideration. The wrong placement could make it a pain to use efficiently. Here are five things to take into account.

Where will the garbage disposal be?

Do you want to place the garbage disposal on the larger or smaller side? Once you decide that, look under your kitchen sink and see on which side you have enough space for it. 

If you’re unsure on which side to place the disposal on, know that most people install it on the large sink. This gives them plenty of space for food prep, while the dishes that can’t go into the dishwasher have plenty of space in the smaller bowl.

Obviously, it’s up to you to decide which side you want to use for dirty dishes and which to keep as a clean sink.

Which side do you want the faucet to be on?

Are you right-handed or left-handed? Consider that when deciding which side you want the faucet to be on. Most right-hand people prefer the faucet on the right for easier reach; thus, the smaller side should be on the right, too. If you’re left-handed, switch the sides. Once again, you can decide what works best for you.

Your plumbing layout

Sometimes, the plumbing layout will decide the placement for you regardless of your preference. Look under the sink and check the water supply connections, then consider how you’ll hook the faucet to them. Based on this, decide the best layout for your 60/40 sink.

Dishwasher placement 

Is your dishwasher on the right side or left side of the sink? Do you want to use the larger or smaller bowl for dirty dishes?

As a rule of thumb, you should place the dirty bowl closer to the dishwasher. This will give you the shortest way to move the dishes from the sink to the dishwasher without making a mess.

Countertop space

Lastly, consider the layout of your kitchen and countertop space. If your counter is narrower on one side and you want a sink with an offset small bowl, you should place the smaller side on the narrow part of your counter.

If both bowls have the same length, you can decide on which side to place the small bowl based on the other factors above or your preference.

Faucet Placement Options On 60/40 Sink 

We’ve talked about the sink bowl layout, but what about the faucet? Should it be centered with the sink or offset? Let’s see the pros and cons of each placement.

Faucet Centered with the Sink and Cabinet

Like most double sinks, most 60/40 sinks have a length of about 36 inches. A centered placement refers to positioning the faucet exactly in the middle, leaving about 18 inches of space on both sides. 

This type of placement aligns the faucet with the cabinet doors and is generally preferred for single bowl sinks.

If you’re a symmetry geek, this type of placement can satisfy you visually, especially when looking at the sink from a distance. Since you won’t really be able to tell that the sink is a 60/40 unless you’re right next to it, the faucet will look symmetrically aligned from afar.

A centered placement will generally give you good access to the faucet on the larger side of the sink, but you may struggle to extend the faucet to reach the smaller side. If the fixture isn’t long enough, you can expect lots of splashes whenever you’re using the small bowl.

Moreover, the placement may look awkward when seeing the sink from close by because the faucet will not be aligned with the sink’s divider.

Faucet Aligned with the Sink’s Divider

Much more popular than the centered placement, this layout aligns the faucet with the wall dividing the two bowls rather than the center of the sink.

This type of off center placement gives you the best access to the faucet no matter what side you use. Because the faucet is only slightly offset compared to a 50/50 sink, you also may not notice that the fixture isn’t aligned with the cabinet doors.

However, some people still feel that an offset faucet looks like it’s misplaced, so it really comes down to your preference.

Sink Comparison: 70/30 vs. 60/40

There are two kinds of offset sinks: 60/40 and 70/30. Knowing the difference between them can help you decide which is best for you.

Long story short, there is only one major difference between the models: the size of each bowl. As you can imagine, the 70/30 sink has a big bowl that’s about 70% of the entire sink surface and a smaller one that is around 30%.

The same goes for the 60/40 sink, but the larger bowl is slightly smaller than a 70/30 configuration, whereas the smaller bowl is slightly larger. By comparison, a 50/50 sink has two identical bowls.

In each category, there are various types of sinks with different layouts. Some have the smaller bowl shorter and shallower than the large one, while others maintain the same length and depth. Some sinks have a faucet opening, while others require you to mount the faucet on the countertop.

When it comes to choosing, it all comes down to your needs and preference. What do you want to use each bowl for? Do you have really large pots and pans that need soaking? Do you want to soak baking trays too? If so, a 70/30 sink might be better for you, the large bowl giving you plenty of room for the purpose. 

Do you want a large bowl for food prepping but also some space for the dishes that can’t go into the dishwasher? Perhaps you should opt for a 60/40 sink.

Related Questions

Undeniably, 60/40 sinks are practical. Before buying one, though, you might still have questions. Check out the answers below.

What side of the sink should the garbage disposal be on?

There isn’t any right or wrong answer for this, but as a general rule, the garbage disposal should go on the side of the sink you use for food prepping.

This placement gives you peace of mind when washing fruit or vegetables, as you won’t have to worry about food scraps getting into your pipes and clogging your plumbing system. The other bowl should be used for washing or soaking dishes.

You might want to switch the garbage disposal placement if you don’t have a dishwasher, though. In this way, larger food scraps and leftovers won’t get directly into the drain.

How far should the faucet extend into the sink?

If you want a functional kitchen, the faucet should extend at least seven inches into the sink from its edge. The only exception is an extendable faucet.

How far should the soap dispenser be from the faucet?

The typical distance between a faucet and a sink-mounted soap dispenser is about eight inches for kitchen sinks. In a bathroom layout, this distance is reduced to about four inches. Thus, you could place your dish soap dispenser at any distance from the faucet, between four and eight inches.

What does faucet hole center spacing mean?

The hole center spacing refers to the distance between two pre-drilled faucet holes in the sink or vanity, measured from the center of the right hole to the center of the left hole. This distance is important when installing a sink with two faucets. However, this type of layout is outdated, and most modern sinks have only one faucet nowadays. 


Where to place your faucet on a 60/40 sink is a matter of preference. If you want it to be symmetrical with the cabinet, place it in the center of the sink. Otherwise, opt for an offset placement. Since symmetry is overrated, we recommend the offset placement for its original visual and practical purposes alike.

Recent Posts